> > 产品目录 > > 多用途半自动滴液机

DD 305
数控型定量滴液机

双头式同步出胶
内置微形处理控制器
按键式输入出胶时间
LED显示出胶时间
出胶时间0－99.99秒
具防滴漏功能
荣获欧洲CE标准

Specifications　

Size:

14.81”x7.30”x2.5”(37.62x18.7x6.35cm)

Weight: 5.751bs(2.61kg)

Voltage:

115 and 230V ac 50/60Hz
Input Pressure: 100psi(maximum)

Type:

Microprocessor based

Cycle Rate:

900 Per minute
Reset Time: less than one millisecond

Power Consumption:

8 Watts

Interanl Voltage:

24V dc

Operating Pressure:

2 to 100psi

Time Range:

0.01-99.99 seconds

Standards:

EUROPEAN CE APPROVED UNIT

 

Standard Accessories

Qty Part No Description Qty Part No Description
1 580101 5 Micron Filter 10 560009 30cc Barrel Cap
1 580102 Power Cord 2 560003A 5cc Adaptor Assy
1 580103 Power Cord No Plug 2 560004A 30cc Adaptor Assy
1 580104 Air Hose Assy 10 560005B 5cc Adaptor O Ring
1 580105 Foot Switch 10 560006BA 30cc Adaptor O Ring
1 580106 Syringe Stand 25 560010 16GA Taper Tip
1 580107 Vacuum Filter 25 560011 18GA Taper Tip
1 580108 Plug 25 560012 20GA Taper Tip
1 580109 Metric Adaptor 25 560013 22GA Taper Tip
25 560017A Spec Teflon Tip 25 560014 23GA Taper Tip
25 560016 30GA Blunt Tip 10 560001A 5cc Barrel
25 560015 25GA blunt Tip 10 560002B 30cc Barrel
10 560008 5cc Barrel Cap 10 580142 Barrel Tip Cap