产品目录 > > 全自动可编程滴液机

MODEL I&J2200
全自动滴液机

放大及展览会图片


Capabilities

  • Dispenses liquids and pastes in dots, lines, or arcs
  • Repeatability of ±0.01 mm
  • Powerful on-board 32 bit processor
  • Safe operation via area sensor and interlock capability
  • European "CE" approved units available on request


Simple Operation

  • Easy to program via multi-line, backlit teaching box
  • Provides continuous path motion for perfect dispensing
  • Automatically interpolates lines and curves through all axes
  • Storage of up to 100 programs or 6,000 points of data on a single PC memory card

High Efficiency

  • Small footprint of 322 mm by 377 mm conserves workspace
  • Completely self-contained. No external controllers are required

  • High efficiency motors and drivers for low power consumption

Connectivity

  • Standard system includes 16 input signals and 15 output signals for communication with tools and controllers
  • On-board PLC with an independent CPU allows the I&J2200 to control external devices
  • Three RS232C ports for interfacing with external devices

Specifications

　

I&J2200
3 AXIS MODEL

I&J2200-4
4 AXIS MODEL

OPERATING RANGE

X axis/200mm

y axis/200mm

Z axis/50mm

X axis/200mm

Y axis/200mm

Z axis/50mm

R axis/±360°

LOAD

Work (X, Y) 7kg

Tool (z) 3.5kg

MAXIMUM SPEED

PTP

5-500 mm/sec X&Y

2.5-250 mm/sec Z

5-500 mm/sec X&Y

2.5-250 mm/sec Z

6-600°/sec

CP

0.1-500 mm/sec X&Y

0.1-250 mm/sec Z

REPEATABILITY

±0.01 mm per axis

RESOLUTION

X, Y axes 0.05mm

Z axis 0.025mm

X, Y axes 0.05mm

Z axis 0.025mm

R axis 0.09°

DATA MEMORY CAPACITY

100 programs

6000 points

DRIVE SYSTEM

5-phase stepping motor

OPERATION SYSTEM

PTP and CP

# OF CONTROL AXES

X, Y&Z simultaneous (CP)

X, Y, Z&R simultaneous (CP)

TEACHING METHOD

Remote & Manual data Input (MDI)

CPU 

32 bit  (MC68EC020, MC68882)

PLC

50 programs, 100 steps for each program

I/O SIGNALS

16 input signals and 15 output signals

EXTERNAL INTERFACE

RS232S 1 Ch for PC, 1 Ch for Teach Pendant,

1Ch for ext. equip. (optional)

PROGRAM LOADING

Via memory card
MEMORY BACKUP

MAIN UNIT

MEMORY CARD

 

Capacitor storage for about one weekFlash

memory without battery for semi-permanent storage

POWER SUPPLY

100 V SPECS

200 V SPECS

 

AC 90-132V

AC 180-250V

POWER CONSUMPTION

200VA

AIR PRESSURE

0.49 Mpa (5 Kgf/cm2)

WORKING AMBIENT TEMP.

0-40°C

RELATIVE HUMIDITY

20-95% no condensation

DIMENSIONS
(W×D×H) (mm)

322×377×536

WEIGHT

18kg 20kg