> > 产品目录 > > 多用途半自动滴液机

 

PPD-130 Peristaltic dispenser
齿轮带动式滴液机

PPD-130 peristaltic pump dispensing

Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.

The model PPD-130 offers excellent features for air free dispensing of materials such as cyanoacrylates, solvents, alkalines and acids. Dispense outputs can be timed from 0.01-99.99 seconds with flow speeds from 0.01-6ml/min using Teflon tubing and from 0.1-20ml/min using silicone tubing. The pump is bi-directional allowing snuff-back after discharge to prevent dripping of the fluid.

 

PPD-130 features

Air free dispensing
Forward and reverse motion
Instant reverse for snuff-back cuts off liquid flow
Adjustable interval before reverse direction
Simple load mechanism also provides easy cleaning
Teflon and silicone tube options
Continuous or timer modes
Large segment digital LED display
Output signal to indicate end of dispense cycle
Clean room compatible

 

Operation

Suitable for small shots and continuous operation
Adjustable rotor speed in volume 0 - 10
Self priming from bottle or jar
For smaller discharges at lower flow rates, Teflon tubing is used
For larger discharges at higher flow rates silicone tubing is used
System operated by finger switch on holder or remotely from I/0 connector at rear of unit
Timer display counts down for discharge

 

Specifications

Size: 7.18" x 3.20" x 6.73"
(182.4 x 81.2 x 171mm)
Weight: 6.6lbs (3kg)
Input Voltage: 110V & 220V models 50/60 Hz
Dispense time: 0.01 - 99.99 seconds
Internal Voltage: 5V dc
Cycle initiation: continuous & timed
Rotor Speed: up to 120 rpm (max.)
Flow speed:
0.01 - 6ml/min. (Teflon tube)
0.1 - 20ml/min (silicone tube)
Dispense pressure: over 1.5Kg/cm2
Direction of pump: both direction (Forward / Reverse)
Snuff-back: programmable by reverse rotation
Digital display: time count down
I/0: connection for remote operation

 

 

Accessories (included)

Part No Qty Description
562030-T 1 standard rotor for standard tubes
560989-B 1 nozzle holder (with switch)
561010-B 1 nozzle 1.5mm diameter
561011-B 1 nozzle 1.9mm diameter
561012-B 1 nozzle 2.4mm diameter
561013-B 1 nozzle 2.9mm diameter
560984A 1 hose 1 meter (3.28ft) 1.0 x 1.6mm
560985A 1 hose 1 meter (3.28ft) 1.4 x 2.0mm
560995A 1 hose 1 meter (3.28ft) 1.9 x 2.5mm
560996A 1 hose 1 meter (3.28ft) 2.4 x 3.0mm
562031 1 remote connector
562032 1 foot pedal (optional not included)